Using a 40/60 mix of India ink to distilled water, all of the tonal values were laid in using an airbrush. Tombow brush pens, Pigma Microns and white paint markers were then used to ink all of my lines, hatching and highlights.
I started by photographing myself and printing those photos to scale ( 8" x 8" ). I taped the printouts to the back of the bristol paper and taped off my work area on the front using blue painter’s tape. Next, I used a lightbox to quickly trace guidelines using a 005 Micron pen. Using Krylon Easy-Tack adhesive, I applied a solid sheet of blank copy paper to the bristol and cut out large masks for the head, shirt, eyes and sometimes eyeglasses using an X-acto knife.
Starting with the shirt, each area is unmasked and worked on. When airbrushing the skin, I would unmask all areas (if there were more than one) to get an even base tone across the entire area, followed by using those masks individually to get hard lines of separation where needed – such as the head and neck line or a side of the face beyond the bridge of the nose. Smaller, hand-held masks – either cut with scissors or simply hand-ripped to create an organic shape or line – were then used for final details. Once the airbrushing was complete, the tape was removed and various erasers, and even sandpaper, were used to remove ink to create highlights and texture.